First, I’ve always had this problem with my 722, before and after the blasted 5.xx software updates. I have my 722’s audio going through HDMI to my LCD TV. Then I have the TV’s optical out hooked up to my Pioneer receiver. When I pause something (recorded or live), it seems that the sound output from the 722 just stops. However, my TV shows that PCM audio is coming in when I pause it- I don’t know if it “sees” anything, or if that’s just a default assumption when the optical is hooked up.

I’ve got a 42″ Plasma HDTV 1080i and wonder how you get output from dvi or hdmi to work good on the TV. I have tried before, but no resolution that was selectable would look good at all on the tv. So i’m curious how you get a good resoultion to work with the TV and it look good. I’d actually like to try gaming on it.

I have a question about de-interlacing and progressive signals. first off I have three output options to my 40″ Sony LCD TV from my pc 1. VGA -1360×768@60HZ 2. HDMI - 1080i@50Hz 3. HDMI - 720p@50hz my DTV source is PAL (so 25/50Hz) provided by TVServer an seperate machine. I am trying to work out what my best options is to resolve blurriness on fast moving TV (car racing, football,soccer/etc) 1. If My DTV source is an interlaced source and my output is set to say - HDMI720p, what

If you want to connect your computer to a high-definition TV (HDTV), may be this guide can help you. First of all, before connecting your PC to your HDTV, you must set your video card to a supported resolution for your monitor. For flat screen, set the card to the native resolution. In case you can’t find any resolution suitable with your monitor, you can use video card driver to create a custom resolution. The late model of HDTV usually fit with both DVI and HDMI connectors. DVI cable actu

I am interested in connecting a DVD burner to my VIP722 and see some advice on best options. Here’s my current setup. My 722 is setup in Single Mode and outputs to my HDTV via HDMI. I have a my second TV (SD) hooked up in another room via the In Home Distribution output jack….I also have an OTA antenna connected to my 722 for my locals. The DVD Burner (Emerson EWR10D4) which has component output (one only), which I think I should use to output it back to my TV. It also has a S-Video (out),